HowTo: srm22 - Generating poolmanager.conf & LinkGroupAuthorization.conf

About this documentation

• This documentation is PIC specific and requires the proper scripts and xsl/xml files.
• If you are interested on this, please do not hesitate to contact us for requesting these files: services@support.pic.es

About srm22

• srm22 is a software that can be found in the dccore' server.
• srm22 location:

• Prod instance -> dccore.pic.es:/root/srm22
• Test instance -> dccore-test.pic.es:/root/srm22
• Dev instance -> dccore-dev.pic.es:/root/srm22
• PPS instance -> dccore-pps.pic.es:/root/srm22

• srm22 content:

• srm22-[prod|test|dev|pps].xml - This is the file you'll need to edit
• LinkGroupAuthorization.xsl - Compiles srm22-[prod|test|dev|pps].xml to generate the LinkGroupAuthorization file, needed in the SRM node (i.e. srm.pic.es)
• poolmanagerconfig.xsl - Compiles srm22-[prod|test|dev|pps].xml to generate PoolManager.conf file, needed in the PoolManager node (i.e. dccore.pic.es)
• propagarCanvis.sh - This eases your life compiling files and copying them where they need to be.
• historic - In this directory you'll find old versions of the config files

Adding / Moving / Removing pools from poolgroups

• Locate the poolgroup tag corresponding to the VO and add/remove the desired pools. For instance, for LHCb:

 <poolgroup name="pgroup-lhcb-ro"> 
 </poolgroup>
 <poolgroup name="pgroup-lhcb">
     <pool name="dc014_1"/> 

     <pool name="dc030_1"/> 
     <pool name="dc030_2"/> 
     <pool name="dc030_3"/> 
     <pool name="dc030_4"/> 

     <pool name="dc035_1"/> 

     <pool name="dc043_1"/> 
 </poolgroup>

• Adding a new pool is as easy as making another pool name line with the right pool name.
• Moving pools between poolgroups is the same. Just make sure the pool is empty before moving it, if not you might make a mess.

Apply and propagate changes on srm22-[prod|test|dev|pps].xml

Check that changes are correct

• You should run the command as follows: ./propagarCanvis.sh srm22-prod.xml
• The command will provide a diff between the old poolmanager.conf file and the current configuration, but will not apply changes neither propagate them.
• As an example:

[root@dccore01 srm22]# ./propagarCanvis.sh srm22-prod.xml 
diff /tmp/LinkGroupAuthorization.conf.temp /etc/dcache/LinkGroupAuthorization.conf

#############################################################################################

diff /tmp/poolmanager.conf.temp /var/lib/dcache/config/poolmanager.conf

Save + Propagate & Apply Changes

Save + Propagate

• Once changes have been checked and everything looks correct (see: [[]]), you can save + propagate changes.
• Save + Propagate changes are done in the same action by running the command: ./propagarCanvis.sh srm22-prod.xml -yes (adding -yes at the end)
• As an example:

[root@dccore01 srm22]# ./propagarCanvis.sh srm22-prod.xml -yes
LinkGroupAuthorization.conf                                                                                                                                          100% 1011     1.0KB/s   00:00    
Per fer efectius els canvis fer un 'reload -yes' al PoolManager@dccore.pic.es i un 'update link groups' a SrmSpaceManager@srm.pic.es

• Save + Propagate changes make configuration changes in two dCache services:

• PoolManager: Save + Apply writes the new Pool Manager configuration on the /var/lib/dcache/config/poolmanager.conf file
• SrmSpaceManager: sends the LinkGroupAuthorization.conf file to the SrmSpaceManager server (i.e. srm.pic.es). This is written in /etc/dcache/LinkGroupAuthorization.conf by replacing the old version.

Apply Changes

• Once Save + Propagate is being performed, we need apply changes to the PoolManager and to the SrmSpaceManager services:

• PoolManager changes can be applied by:

1. Logging to the Admin Console via SSH2: 'ssh -2 -x -o StrictHostKeyChecking=no -l admin -c blowfish -p 22224 dccore.pic.es
2. Move to the PoolManager cell: cd PoolManager
3. Reload the new configuration from the /var/lib/dcache/config/poolmanager.conf by running: reload -yes

• SrmSpaceManager changes can be applied by:

1. Logging to the Admin Console via SSH2: 'ssh -2 -x -o StrictHostKeyChecking=no -l admin -c blowfish -p 22224 dccore.pic.es
2. Move to the PoolManager cell: cd SrmSpaceManager
3. Reload the new configuration from the /etc/dcache/LinkGroupAuthorization.conf by running: update link groups