Revision as of 09:03, 24 March 2020

Introduction

PIC offers a service for running Jupyter notebooks on CPU or GPU resources. This service is primarily thought for code developing or prototyping rather than data processing. The usage is similar to running notebooks on your personal computer but offers the advantage of developing and testing your code on different hardware configurations.

Since the service is strictly thought for development and small scale testing tasks, a shutdown policy for the sessions has been put in place:

The maximum duration for a session is 48h.
After an idle period of 2 hours, the session will be closed.

In practice that means that you should estimate the test data volume that you work with during a session to be able to be processed in less than 48 hours.

How to connect to the service

Got to jupyter.pic.es to see your login screen.

Sign in with your PIC user credentials. This will prompt you to the following screen.

Here you can choose the hardware configuration for your Jupyter session. After choosing a configuration and pressing start the next screen will show you the progress of the initialisation process. Keep in mind that a job containing your Jupyter session is actually sent to the HTCondor queuing system and waiting for available resources before being started. This usually takes less than a minute but can take up to a few depending on our resource usage.

In the next screen you can choose the tool that you want to use for your work: a Python notebook, a Python console or a plain bash terminal.

Your python environments should appear under Notebook and Console headers. In a later section we will show you how to create a new environment and to remove an existing one.

Terminate your session and logout

It is important that you terminate your session before you log out. In order to do so, go to the top page menu "File -> Hub Control Panel" and you will see the following screen.

Here, click on the Stop My Server button. After that you can log out by clicking the Logout button in the right upper corner.

Python virtual environments

This section covers the use of Python environments with conda or venv. Keep reading for the instructions on how to create one.

Initialize conda (only if you use conda)

Before using conda in your bash session, you have to initialize it. For access to an available conda installation, please get in contact with your project liaison at PIC. He/she will give you the actual value for the /path/to/anaconda placeholder.

Log onto Jupyter and start a session. On the homepage of your Jupyter session, click on the terminal button on the session dashboard on the right to open a bash terminal.

First, let's initialize conda for our bash sessions:

[neissner@td110 ~]$ eval "$(/path/to/anaconda/bin/conda shell.bash hook)"
[neissner@td110 ~]$ conda init

This actually changes the .bashrc file in your home directory in order to activate the base environment on login. To avoid that the base environment is activated every time you log on to a node, run:

[neissner@td110 ~]$ conda config --set auto_activate_base false

For now you can exit the terminal.

[neissner@td110 ~]$ exit

Creating a virtual environment

Before creating a new environment, please get in contact with your project liaison at PIC as there may be already one (or several) environments in place.

If none of the existing environments is suitable for your needs, you will need to create a new environment. First, create a directory in a suitable place to store the environment. For single-user environments, place them in your home under ~/env. For environments that will be shared with other project users, contact your project liason and ask him/her for a path in a shared storage volume that is visible to all of them.

conda: environments created with $ conda create.
venv: environments created with $ python3 -m venv.

Other virtual environments using other tools such as virtualenv are not explicitly considered in this section. Anyhow, once created they are usually used with the same syntax as venv environments.

Unlink an environments from Jupyter

If you want to know which environments are available for your project, please contact your project liaison at PIC. He/she will give you the values for the placeholder /path/to/predefined/conda/environment or /path/to/predefined/venv/environment. Although, you might find instructions on how to create your own environments, we would like to encourage the use of the predeployed environments. The main reason is the sheer size of a virtual environment which reaches easily several GB. If for any reason you need to use your own environment, make sure that the ipykernel module is installed.

Log into Jupyter, start a session. From the session dashboard choose the bash terminal.

Inside the terminal, activate your environment.

For conda:

[neissner@td110 ~]$ conda activate /path/to/predefined/conda/environment
(...) [neissner@td110 ~]$

The parenthesis (...) in front of your bash prompt show the absolute path to your environment.

For venv:

[neissner@td110 ~]$ . /path/to/predefined/venv/environment/bin/activate
(...) [neissner@td110 ~]$

Link the environment to a Jupyter kernel. For both, conda and venv:

(...) [neissner@td110 ~]$ python -m  ipykernel install --user --name=whatever_kernel_name
Installed kernelspec whatever_kernel_name in /nfs/pic.es/user/n/neissner/.local/share/jupyter/kernels/whatever_kernel_name

Deactivate your environment.

For conda:

(...) [neissner@td110 ~]$ conda deactivate

For venv:

(...) [neissner@td110 ~]$ deactivate

Now you can exit the terminal. After refreshing the Jupyter page your whatever_kernel_name appears in the dashboard. In this example test has been used for whatever_kernel_name

Remove Jupyter kernel

Log onto Jupyter, start a session and from the session dashboard choose the bash terminal. To remove your environment/kernel from Jupyter run:

[neissner@td110 ~]$ jupyter kernelspec uninstall whatever_kernel_name
Kernel specs to remove:
  whatever_kernel_name                  /nfs/pic.es/user/n/neissner/.local/share/jupyter/kernels/whatever_kernel_name
Remove 1 kernel specs [y/N]: y
[RemoveKernelSpec] Removed /nfs/pic.es/user/n/neissner/.local/share/jupyter/kernels/whatever_kernel_name

Keep in mind that, although not available in Jupyter anymore, the environment still exists. Whenever you need it, you can link it again.

@@ Line 41: / Line 41: @@
 =  Python virtual environments =
-This section covers the use of Python environments with conda or venv:
+This section covers the use of Python environments with conda or venv. Keep reading for the instructions on how to create one.
-* conda: environments created with ''$ conda create''.
+== Initialize conda (only if you use conda) ==
-* venv: environments created with ''$ python3 -m venv''.
-Other virtual environments using other tools such as '''virtualenv''' are not explicitly considered in this section. Anyhow, once created they are usually used with the same syntax as venv environments.
+Before using conda in your bash session, you have to initialize it. For access to an available conda installation, please get in contact with your project liaison at PIC. He/she will give you the actual value for the '''/path/to/anaconda''' placeholder.
-The creation of virtual environments is not covered in this help. For a list of available environments or for a request for a new one, please get in contact with your project liaison at PIC.
-== Initialize conda (only for conda environments) ==
-If you use conda for the first time in your bash session, you have to initialize it. For access to an available conda installation, please get in contact with your project liaison at PIC. He/she will give you the actual value for the '''/path/to/anaconda''' placeholder.
 Log onto Jupyter and start a session. On the homepage of your Jupyter session, click on the terminal button on the session dashboard on the right to open a bash terminal.
@@ Line 73: / Line 66: @@
 </pre>
-== Link existing environments to a Jupyter kernel (for conda and venv environments) ==
+== Creating a virtual environment ==
+Before creating a new environment, please get in contact with your project liaison at PIC as there may be already one (or several) environments in place.
+If none of the existing environments is suitable for your needs, you will need to create a new environment.
+First, create a directory in a suitable place to store the environment. For single-user environments, place them in your home under ~/env. For environments that will be shared with other project users, contact your project liason and ask him/her for a path in a shared storage volume that is visible to all of them.
+* conda: environments created with ''$ conda create''.
+* venv: environments created with ''$ python3 -m venv''.
+Other virtual environments using other tools such as '''virtualenv''' are not explicitly considered in this section. Anyhow, once created they are usually used with the same syntax as venv environments.
+== Unlink an environments from Jupyter ==
 If you want to know which environments are available for your project, please contact your project liaison at PIC. He/she will give you the values for the placeholder '''/path/to/predefined/conda/environment''' or '''/path/to/predefined/venv/environment'''. Although, you might find instructions on how to create your own environments, we would like to encourage the use of the predeployed environments. The main reason is the sheer size of a virtual environment which reaches easily several GB. If for any reason you need to use your own environment, make sure that the '''ipykernel''' module is installed.

Difference between revisions of "JupyterHub"